您当前的位置:
Manganese chloride (Synonyms:氯化锰)
目录号 : KM32212 CAS No. : 7773-01-5 纯度 : 99%
Manganese chloride 具备口服活性,可用作磁共振肝脏造影剂。它能够诱导细胞凋亡并激活 mTOR 信号通路,一方面可促进造血功能恢复、减轻辐射引起的骨髓和脑损伤,另一方面也会诱发认知障碍,同时还可应用于肾功能损害的研究。
规格 价格 是否有货 数量
100g
In-stock
500g
In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性
Manganese chloride has oral activity and can be used as a magnetic resonance liver contrast agent. It induces apoptosis and activates the mTOR signaling pathway. On one hand, it promotes hematopoietic function recovery and reduces radiation-induced bone marrow and brain damage; on the other hand, it also induces cognitive impairment. Additionally, it can be applied in the study of renal dysfunction.
分子式
Cl2Mn
分子量
125.84
CAS号
7773-01-5
中文名称
氯化锰
运输条件
Room temperature in continental US; may vary elsewhere.
储存方式

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

溶解性数据
In Vitro:

DMSO : 50 mg/mL (397.33 mM; Need ultrasonic)

1 M HCl : 150 mg/mL (1191.99 mM; Need ultrasonic)

H2O : 100 mg/mL (794.66 mM; ultrasonic and adjust pH to 2 with 1 M HCl)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 7.9466 mL 39.7330 mL 79.4660 mL
5 mM 1.5893 mL 7.9466 mL 15.8932 mL
10 mM 0.7947 mL 3.9733 mL 7.9466 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

暂无相关参考文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
动物实验计算换算器
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL ddH2O,混匀澄清。

配置后的溶液总体积

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。