Isopropyl alcohol (Synonyms:异丙醇;1-Methylethanol; 2-Hydroxypropane; NSC 135801)
目录号 : KM32672 CAS No. : 67-63-0 纯度 : 99%
Isopropyl alcohol (1-Methylethanol) 是一种生化试剂。Isopropyl alcohol 可用于生产农药、工艺催化剂和溶剂。Isopropyl alcohol 还可用作防腐剂和消毒剂。Isopropyl alcohol 的毒性约为 Ethyl alcohol 的两倍,但低于 Methyl alcohol。
规格 价格 是否有货 数量
100mL
In-stock
500mL
In-stock
1L
In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

Isopropyl alcohol is a biochemical reagent. Isopropyl alcohol can be used for the manufacture of agricultural chemicals, process catalysts, and solvents. Isopropyl alcohol is also used as an antiseptic and disinfectant. Isopropyl alcohol is about twice as toxic as Ethyl alcohol, but less toxic than Methyl alcohol.

IC50&Target

Microbial Metabolite                                        Human Endogenous Metabolite

分子式
C3H8O
分子量
60.10
CAS号
67-63-0
中文名称
2-丙醇
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

2-8°C, protect from light

* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)

溶解性数据
In Vitro: 

DMSO: 100 mg/mL (1663.89 mM; Need ultrasonic)

配制储备液
                                           
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
                                                                                                                    
1 mM 16.6389 mL 83.1947 mL 166.3894 mL
5 mM 3.3278 mL 16.6389 mL 33.2779 mL
10 mM 1.6639 mL 8.3195mL 16.6389 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

暂无相关参考文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
动物实验计算换算器
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL ddH2O,混匀澄清。

配置后的溶液总体积

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。