BTB06584
目录号 : KM9334 CAS No. : 219793-45-0 纯度 : 98%

BTB06584 是一种选择性的且依赖 IF1 的线粒体 F1Fo-ATPase 抑制剂,且不影响 ATP 的合成。BTB06584 可延迟缺血性细胞死亡。

规格 价格 是否有货 数量
5mg
In-stock
10mg
In-stock
50mg
In-stock
100mg
In-stock
200mg 询价 In-stock
500mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

BTB06584 is a selective and IF1-dependent mitochondrial F1Fo-ATPase inhibitor without compromising ATP synthesis. BTB06584 can delays ischaemic cell death.

IC50&Target

Mitochondrial F1Fo-ATPase

体外研究

In HL-1 cells, BTB06584 (100 μM) inhibits F1Fo-ATPase activity with no effect on the mitochondrial membrane potential (ΔΨm ) or O2 consumption. BTB06584 (100 μM) pretreatmet protects against ischaemic cell death in HL-1 cells prior to a period of ischaemia. ATP consumption is decreased following inhibition of respiration, and ischaemic cell death is reduced.
BTB06584 efficiency is increased by IF1 overexpression and reduced by silencing the protein.

体内研究

BTB06584 (1 μM; 24 hours) treatment rescued defective haemoglobin synthesis in zebrafish pinotage (pnt) mutants in which expression of the Atpif1a gene is lost. The concentrations of BTB06584 that restore haemoglobin biosynthesis also alter mitochondrial bioenergetics in living fish.

分子式
C19H12ClNO6S
分子量
417.82
CAS号
219793-45-0
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : ≥ 47 mg/mL (112.49 mM)

* "≥" means soluble, but saturation unknown.

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.3934 mL 11.9669 mL 23.9338 mL
5 mM 0.4787 mL 2.3934 mL 4.7867 mL
10 mM 0.2393 mL 1.1967 mL 2.3934 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.5 mg/mL (5.98 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (5.98 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

科研文献
暂无相关参考文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
动物实验计算换算器
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL ddH2O,混匀澄清。

配置后的溶液总体积

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。