A66
目录号 : KM6880 CAS No. : 1166227-08-2 纯度 : 98%

A66 是一种高特异性的选择性的 p110α 抑制剂,IC50 为 32 nM。

规格 价格 是否有货 数量
5mg
In-stock
10mg
In-stock
50mg
In-stock
100mg
In-stock
200mg 询价 In-stock
500mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

A66 is a highly specific and selective p110α inhibitor with an IC50 of 32 nM.

体外研究

A66 is a potent inhibitor of the wild-type and oncogenic forms of p110α but not other class-I PI3K isoforms. The p110α-specific inhibitor A66 (0.7 μM) induces a 75-80% reduction in focus formation by the highly transforming iSH2 mutants KS459delN, DKRMNS560del, and K379E. The p110α-specific inhibitor A66 reduced phosphorylation of Akt on T308 by all p85 mutants.

体内研究

The optimal dosing strategy for xenograft studies is determined by investigating the drug pharmacokinetics after a dose of 10 mg/kg of body weight by intraperitoneal injection in CD-1 mice. Despite a short half-life of only 0.42 h, the large Cmax (8247 nM) of A66 S that is reached 30 min after dosing ensured that the AUC0-inf (area under the curve from zero time to infinity) (6809 nM•h) is similar to that of BEZ-235 (7333 nM•h), which has a longer half-life of 2.73 h. Furthermore, the A66 on SK-OV-3 tumour tissue is tested using a single dose of 100 mg/kg of body weight to determine whether a long-lasting effect of the drug could be achieved on target tissues. These studies show that A66 causes a profound reduction in the phosphorylation of Akt/PKB and p70 S6 kinase, but not of ERK (extracellular-signal-regulated kinase), at both 1 and 6 h after dosing. Levels of A66 in plasma are determined to be 21.1±1.2 μM and 9.1±1.1 μM at 1 and 6 h after drug injection, whereas levels of A66 in the tumor are 22.7±2.1 μM and 16.0±1.3 μM at the same time points.

分子式
C17H23N5O2S2
分子量
393.53
CAS号
1166227-08-2
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : 50 mg/mL (127.06 mM; Need ultrasonic)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.5411 mL 12.7055 mL 25.4110 mL
5 mM 0.5082 mL 2.5411 mL 5.0822 mL
10 mM 0.2541 mL 1.2706 mL 2.5411 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.5 mg/mL (6.35 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (6.35 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.5 mg/mL (6.35 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (6.35 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 2.5 mg/mL (6.35 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (6.35 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

科研文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号