DIDS sodium salt (Synonyms:MDL101114ZA)
目录号 : KM17267 CAS No. : 67483-13-0 纯度 : 98%

DIDS sodium salt (MDL101114ZA) 是 ABCA1 和 VDAC1 的双抑制剂。

规格 价格 是否有货 数量
50mg
In-stock
100mg 询价 In-stock
200mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

DIDS sodium salt (MDL101114ZA) is a dual ABCA1 and VDAC1 inhibitor.

IC50&Target

ABCA1, VDAC1.

体外研究

Concentration less than 400 μM DIDS has no evident cytotoxic effect on cell viability Pre-treatment with DIDS at the concentration of 100 and 200 μM result in a prevented effect on ALA-SDT-induced cell death, while dose at 50 μM has no inhibition effect. At the concentration of 400 μM DIDS itself slightly decreases the cell viability, although there is no significant statistic difference as compared with the untreated control. Pre-treatment with DIDS (100 μM) clearly inhibit caspase-3 and caspase-9 activation.

分子式
C16H8N2Na2O6S4
分子量
498.48
CAS号
67483-13-0
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : 125 mg/mL (250.76 mM; Need ultrasonic)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.0061 mL 10.0305 mL 20.0610 mL
5 mM 0.4012 mL 2.0061 mL 4.0122 mL
10 mM 0.2006 mL 1.0030 mL 2.0061 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

科研文献
暂无相关参考文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
动物实验计算换算器
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL ddH2O,混匀澄清。

配置后的溶液总体积

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。