Indole-3-carbinol (Synonyms:3-吲哚甲醇; I3C; 3-Indolemethanol)
目录号 : KM15611 CAS No. : 700-06-1 纯度 : ≥98%

Indole-3-carbinol (I3C) 是芳烃受体 (AhR) 的激动剂,为 NF-κB 和 WWP1 (含有 WW 结构域的 E3 连接酶 1) 的抑制剂。

规格 价格 是否有货 数量
200mg
In-stock
1g
In-stock
5g 询价 In-stock
10g 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

Indole-3-carbinol (I3C) inhibits NF-κB activity and also is an Aryl hydrocarbon receptor (AhR) agonist, and an inhibitor of WWP1 (WW domain-containing ubiquitin E3 ligase 1).

体外研究

It is found that Indole-3-carbinol (I3C) inhibits the proliferation of THP-1 cells in a dose- and time dependent manner with minimal toxicity over normal monocytes. The AhR target genes (CYP1A1, IL1β) are overexpressed upon Indole-3-carbinol treatment (p<0.05 to p<0.001). The antiproliferative effects of Indole-3-carbinol are in association with programing cell death. Indole-3-carbinol downregulates BCL2 and upregulates FasR in THP-1 cells (p<0.05 to p<0.001). G1 cell cycle arrest is also observed using flow cytometry. G1-acting cell cycle genes (P21, P27 and P53) are overexpressed (p<0.05 to p<0.001), while CDK2 is downregulated upon Indole-3-carbinol treatment (p<0.01 to p<0.001).Indole-3-carbinol suppresses NF-κB activity and stimulates the p53 pathway in pre-B acute lymphoblastic leukemia cells.

分子式
C9H9NO
分子量
147.17
CAS号
700-06-1
中文名称
3-吲哚甲醇
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : 100 mg/mL (679.49 mM; Need ultrasonic)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 6.7949 mL 33.9743 mL 67.9486 mL
5 mM 1.3590 mL 6.7949 mL 13.5897 mL
10 mM 0.6795 mL 3.3974 mL 6.7949 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.5 mg/mL (16.99 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (16.99 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.5 mg/mL (16.99 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (16.99 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 2.5 mg/mL (16.99 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (16.99 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

临床试验
科研文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号