T-3764518
目录号 : KM8793 CAS No. : 1809151-56-1

T-3764518 是新颖高效的硬脂酰辅酶A去饱和酶 (SCD) 抑制剂,IC50 为4.7 nM。

规格 价格 是否有货 数量
5mg
In-stock
10mg
In-stock
50mg 询价 In-stock
100mg 询价 In-stock
KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

T-3764518 is a novel and potent stearoyl coenzyme A desaturase (SCD) inhibitor with an IC50 of 4.7 nM.

分子式
C20H17F6N5O2
分子量
473.37
CAS号
1809151-56-1
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

4°C, sealed storage, away from moisture and light

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

溶解性数据
In Vitro: 

DMSO : 95 mg/mL (200.69 mM; Need ultrasonic)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.1125 mL 10.5626 mL 21.1251 mL
5 mM 0.4225 mL 2.1125 mL 4.2250 mL
10 mM 0.2113 mL 1.0563 mL 2.1125 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 3.17 mg/mL (6.70 mM); Clear solution

    此方案可获得 ≥ 3.17 mg/mL (6.70 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 31.7 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 3.17 mg/mL (6.70 mM); Clear solution

    此方案可获得 ≥ 3.17 mg/mL (6.70 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 31.7 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

  • 3.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 3 mg/mL (6.34 mM); Clear solution

    此方案可获得 ≥ 3 mg/mL (6.34 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 30.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号