JNK-IN-8 (Synonyms:JNK Inhibitor XVI)
目录号 : KM8610 CAS No. : 1410880-22-6 纯度 : 98%

JNK-IN-8 (JNK Inhibitor XVI) 是一种有效的 JNK 抑制剂,抑制 JNK1,JNK2 和 JNK3,IC50 分别为 4.7 nM,18.7 nM 和 1 nM。

规格 价格 是否有货 数量
2mg
In-stock
5mg
In-stock
10mg
In-stock
50mg
In-stock
100mg 询价 In-stock
200mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

JNK-IN-8 (JNK Inhibitor XVI) is a potent JNK inhibitor with IC50s of 4.7 nM, 18.7 nM, and 1 nM for JNK1, JNK2, and JNK3, respectively.

体外研究

JNK-IN-8 inhibits phosphorylation of c-Jun, a direct substrate of JNK kinase. JNK-IN-8 inhibits c-Jun phosphorylation in HeLa and A375 cells with EC50 of 486 nM and 338 nM, respectively. JNK-IN-8 also exhibits exceptional selectivity based upon KinomeScan and enzymatic profiling. Cumulatively these combined profiling technologies demonstrate that both JNK-IN-8 and JNK-IN-12 are remarkably selective covalent JNK inhibitors and are appropriate for interrogating JNK-dependent biological phenomena. JNK-IN-8, a selective pan-JNK inhibitor, is discovered to inhibit JNK kinase by broad-base kinase selectivity profiling of a library of acrylamide kinase inhibitors based on the structure of imatinib using the KinomeSca approach. JNK-IN-8 possess distinct regio-chemistry of the 1,4-dianiline and 1,3-aminobenzoic acid substructures relative to imatinib and uses an N,N-dimethyl butenoic actemide warhead to covalently target Cys154. JNK-IN-8 adopts an L-shaped type I binding conformation to access Cys 154 located towards the lip of the ATP-binding site.

分子式
C29H29N7O2
分子量
507.59
CAS号
1410880-22-6
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : ≥ 35 mg/mL (68.95 mM)

* "≥" means soluble, but saturation unknown.

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 1.9701 mL 9.8505 mL 19.7009 mL
5 mM 0.3940 mL 1.9701 mL 3.9402 mL
10 mM 0.1970 mL 0.9850 mL 1.9701 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.5 mg/mL (4.93 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (4.93 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: 2.5 mg/mL (4.93 mM); Suspended solution; Need ultrasonic

    此方案可获得 2.5 mg/mL (4.93 mM) 的均匀悬浊液,悬浊液可用于口服和腹腔注射。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 2.5 mg/mL (4.93 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (4.93 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

科研文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号