Lumacaftor (Synonyms:鲁玛卡托; VX-809; VRT 826809)
目录号 : KM8386 CAS No. : 936727-05-8 纯度 : 98%

Lumacaftor (VX-809; VRT 826809) 是 CFTR 调节剂,可纠正 CFTR 蛋白的折叠和运输。

规格 价格 是否有货 数量
5mg
In-stock
10mg
In-stock
50mg
In-stock
100mg
In-stock
200mg 询价 In-stock
500mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

Lumacaftor (VX-809; VRT 826809) is a CFTR modulator that corrects the folding and trafficking of CFTR protein.

IC50&Target

EC50: 0.1 μM (CFTR)

体外研究

In fischer rat thyroid (FRT) cells, Lumacaftor improves F508del-CFTR maturation by 7.1±0.3 fold (n=3) compared with vehicle-treated cells (EC50, 0.1±0.1 μM; n=3) and enhances F508del-CFTR-mediated chloride transport by approximately fivefold (EC50, 0.5±0.1 μM; n=3). At Lumacaftor concentrations greater than 10 μM, the response is reduced, resulting in a bell-shaped dose-response relationship with an IC50 of approximately 100 μM. Lumacaftor is orally bioavailable in rats and achieved in vivo plasma levels significantly above concentrations required for in vitro efficacy. Lumacaftor produces a concentration-dependent increase in the HRP luminescence signal after incubation with cells at 37°C or 27°C in both cell lines, with a similar EC50 value of approximately 0.3 µM. In F508-HRP CFBE41o cells at 37°C, Lumacaftor increases the signal maximally to approximately 250 luminescence arbitrary units (a.u.) over the DMSO control baseline of approximately 60 a.u., representing an approximately 4-fold signal increase. Similarly, with the R1070W-HRP CFBE41o cells, Lumacaftor increases the signal maximally to approximately 220 a.u. over the DMSO control baseline of approximately 85 a.u., representing an approximately 2.5-fold signal increase. Therefore, both cell lines produced robust signals with a good dynamic range for high-throughput screening.

体内研究

Oral dosing of 1 mg/kg Lumacaftor in male Sprague-Dawley rats results in a Cmax of 2.4±1.3 μM with a t1/2 of 7.7±0.4 h (mean±SD; n=3), indicating that that Lumacaftor is orally bioavailable and able to reach plasma levels that significantly exceeded EC50s for F508del-CFTR correction.

分子式
C24H18F2N2O5
分子量
452.41
CAS号
936727-05-8
中文名称
鲁玛卡托
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

2-8°C, sealed storage, away from moisture

* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

溶解性数据
In Vitro: 

DMSO : 25 mg/mL (55.26 mM; ultrasonic and warming and heat to 60°C)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.2104 mL 11.0519 mL 22.1038 mL
5 mM 0.4421 mL 2.2104 mL 4.4208 mL
10 mM 0.2210 mL 1.1052 mL 2.2104 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO → 40% PEG300 → 5% Tween-80 → 45% saline

    Solubility: ≥ 3 mg/mL (6.63 mM); Clear solution

    此方案可获得 ≥ 3 mg/mL (6.63 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 30.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

     
  • 2.

    请依序添加每种溶剂: 10% DMSO  → 90% corn oil

    Solubility: ≥ 3 mg/mL (6.63 mM); Clear solution

    此方案可获得 ≥ 3 mg/mL (6.63 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 30.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

临床试验
科研文献
暂无相关参考文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
动物实验计算换算器
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL ddH2O,混匀澄清。

配置后的溶液总体积

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。