IT1t dihydrochloride - CAS:1092776-63-0

您当前的位置：

IT1t dihydrochloride

目录号 : KM5796 CAS No. : 1092776-63-0 纯度 : 98%

Data Sheet 产品使用指南

IT1t dihydrochloride是高效的CXCR4拮抗剂；抑制CXCL12/CXCR4相互作用的IC₅₀值为2.1 nM。

规格	价格	是否有货
5mg		In-stock
10mg		In-stock
25mg		In-stock
50mg		In-stock
100mg		In-stock
200mg	询价	In-stock
500mg	询价	In-stock

查看所有商品（2）

加入购物车大包装询价

Other Forms of Rapamycin:

5-Fluorouracil In-stock
Chloroquine In-stock
Dimethyl fumarate In-stock
Limonin In-stock
3-Deazaadenosine hydrochloride In-stock

KKL Med 的所有产品和服务仅用于科学研究，不能被用于人体，兽医，我们也不向个人提供产品和服务。

生物活性

IT1t dihydrochloride is a potent CXCR4 antagonist; inhibits CXCL12/CXCR4 interaction with an IC₅₀ of 2.1 nM.

体外研究

The CXCR4 is involved in chemotaxis and serves as a coreceptor for T-tropic HIV-1 viral entry and in cancer metastasis. IT1t is a small, drug-like, isothiourea derivative. IT1t shows very potent and dose-dependent inhibition of the CXCL12/CXCR4 interaction with an IC₅₀ of 2.1 nM. This calcium flux is also inhibited by IT1t with an IC₅₀ of 23.1. Strong electron density is observed for IT1t in the binding cavity of both subunits of the CXCR4 homodimer. In dimers of CXCR4 bound to IT1t, the monomers interact only at the extracellular side of helices V and VI, leaving at least a 4 Å gap between the intracellular regions, which is presumably filled by lipids. The IT1t compound and CVX15 peptide have both been characterized as competitive inhibitors of CXCL12, and many of the receptor-ligand contacts in the co-crystal structures presented are important for CXCL12 binding, including the acidic Asp187, Glu2887.39 and Asp972.63. The binding site of IT1t may point to the major anchor region for this domain.

体内研究

IT1t reduces the formation of TNBC early metastases in the zebrafish xenograft model. Tumor cell invasion at the metastatic site is effectively reduced upon CXCR4 silencing (Fig. 7B), similar to the antagonist IT1t .

分子式

C₂₁H₃₆Cl₂N₄S₂

分子量

479.57

CAS号

1092776-63-0

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

Powder	-20°C	3 years
	4°C	2 years
In solvent	-80°C	6 months
	-20°C	1 month

溶解性数据

In Vitro:

H₂O : 50 mg/mL (104.26 mM; Need ultrasonic)

DMSO : ≥ 30 mg/mL (62.56 mM)

* "≥" means soluble, but saturation unknown.

配制储备液

浓度溶剂体积质量	1 mg	5 mg	10 mg

1 mM	2.0852 mL	10.4260 mL	20.8520 mL
5 mM	0.4170 mL	2.0852 mL	4.1704 mL
10 mM	0.2085 mL	1.0426 mL	2.0852 mL

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80°C, 6 months; -20°C, 1 month。-80°C 储存时，请在 6 个月内使用，-20°C 储存时，请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用；以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

1.

请依序添加每种溶剂： 10% DMSO 40% PEG300 5% Tween-80 45% saline
Solubility: ≥ 1.67 mg/mL (3.48 mM); Clear solution

此方案可获得 ≥ 1.67 mg/mL (3.48 mM，饱和度未知) 的澄清溶液。
以 1 mL 工作液为例，取 100 μL 16.7 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。
2.

请依序添加每种溶剂： 10% DMSO 90% (20% SBE-β-CD in saline)
Solubility: ≥ 1.67 mg/mL (3.48 mM); Clear solution

此方案可获得 ≥ 1.67 mg/mL (3.48 mM，饱和度未知) 的澄清溶液。
以 1 mL 工作液为例，取 100 μL 16.7 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。
3.

请依序添加每种溶剂： 10% DMSO 90% corn oil
Solubility: ≥ 1.67 mg/mL (3.48 mM); Clear solution

此方案可获得 ≥ 1.67 mg/mL (3.48 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。
以 1 mL 工作液为例，取 100 μL 16.7 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。