GSK 650394
目录号 : KM5645 CAS No. : 890842-28-1 纯度 : 98%

GSK 650394 是一种新颖的 SGK 抑制剂,在SPA实验中,对 SGK1 和 SGK2 的IC50 分别为 62 nM 和 103 nM。GSK 650394 还可抑制流感病毒复制。

规格 价格 是否有货 数量
5mg
In-stock
10mg
In-stock
50mg
In-stock
100mg 询价 In-stock
200mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

GSK 650394 is a novel SGK inhibitor with IC50 of 62 nM and 103 nM for SGK1 and SGK2 in the SPA assay respectively. GSK 650394 also inhibits influenza virus replication.

IC50&Target

IC50: 62 nM (SGK1), 103 nM (SGK2)

体外研究

GSK650394 is relatively non-toxic, with LC50 values of 41 μM in M1 cells (68 times its activity IC50) and a LC50 greater than 100 μM in HeLa cells. GSK650394 inhibits SGK1-mediated epithelial transport with an IC50 of 0.6 μM in the SCC assay. GSK650394 inhibits the growth of LNCaP cells with IC50 of approximately 1 μM. GSK650394A inhibits the insulin-induced phosphorylation of PKB-Ser at 3 µM, and essentially abolishes this response at 10 µM. GSK650394A (1-10 µM) does not alter the phosphorylation of PRAS40-Ser246 in hormone-deprived cells or prevent the insulin-induced phosphorylation of this residue.

体内研究

GSK650394 (1, 10, and 30 μM, 10 μL/rat, intrathecally) dose-dependently prevents CFA-induced pain behavior and the associates SGK1 phosphorylation, GluR1 trafficking, and protein-protein interactions at 1 day after CFA administration. GSK650394 at concentrations of 10, 30, and 100 nM (10 μL), but not vehicle solution (SNL 3D+Veh and SNL 7D+Veh, respectively), dose-dependently increases the withdrawal latency of the ipsilateral hindpaw at 1-3 and 1-5 h after injection at days 3 and 7 postsurgery (SNL 3D+GSK and SNL 7D+GSK, respectively). GSK650394 (from day 0 to 6 postsurgery; 100 nM, 10 μL, i.t.) administration alleviates SNL-induced allodynia at days 3, 5, and 7 postsurgery in SNL animals.

分子式
C25H22N2O2
分子量
382.45
CAS号
890842-28-1
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : ≥ 40.7 mg/mL (106.42 mM)

* "≥" means soluble, but saturation unknown.

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.6147 mL 13.0736 mL 26.1472 mL
5 mM 0.5229 mL 2.6147 mL 5.2294 mL
10 mM 0.2615 mL 1.3074 mL 2.6147 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: 2.5 mg/mL (6.54 mM); Suspended solution; Need ultrasonic

    此方案可获得 2.5 mg/mL (6.54 mM) 的均匀悬浊液,悬浊液可用于口服和腹腔注射。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.5 mg/mL (6.54 mM); Suspended solution

    此方案可获得 ≥ 2.5 mg/mL (6.54 mM,饱和度未知) 的均匀悬浊液,悬浊液可用于口服和腹腔注射。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 2.5 mg/mL (6.54 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (6.54 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

科研文献
暂无相关参考文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
动物实验计算换算器
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL ddH2O,混匀澄清。

配置后的溶液总体积

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。