MLT-748
目录号 : KM5584 CAS No. : 1832578-30-9 纯度 : 98%

MLT-748 是一种有效、选择性的 MALT1 的别构抑制剂,与 MALT1 的别构 Trp580 口袋结合,IC50 值为 5 nM。

规格 价格 是否有货 数量
5mg
In-stock
10mg
In-stock
50mg
In-stock
100mg
In-stock
200mg 询价 In-stock
500mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

MLT-748 is a potent, selective and allosteric inhibitor of MALT1, binds MALT1 in the allosteric Trp580 pocket, with an IC50 of 5 nM.

体外研究

MLT-748 reversibly binds to human mutant MALT1(329-728)-W580S (Kd, 13 nM) with affinity similar to that of the wild type MALT1(329-728) (Kd, 42 nM).
MLT-748 (0-2 μM) stabilizes cellular MALT1-W580S, with an EC50 of 69 nM.
MLT-748 (2 µM, 24 hours) increases the phosphorylation of p65 and IκBα in MALT1 patient immortalized B cells.

Western Blot Analysis

Cell Line: MALT1 patient immortalized B cells
Concentration: 2 µM
Incubation Time: 24 hours
Result: Increased NF-κB signaling phosphorylation of both p65 and IκBα as early as 5 min after stimulation with PMA and ionomycin.
分子式
C19H19Cl2N9O3
分子量
492.32
CAS号
1832578-30-9
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : 200 mg/mL (406.24 mM; Need ultrasonic)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.0312 mL 10.1560 mL 20.3120 mL
5 mM 0.4062 mL 2.0312 mL 4.0624 mL
10 mM 0.2031 mL 1.0156 mL 2.0312 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 5% DMSO    95% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.5 mg/mL (5.08 mM); Clear solution

  • 2.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.08 mg/mL (4.22 mM); Clear solution

    此方案可获得 ≥ 2.08 mg/mL (4.22 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.08 mg/mL (4.22 mM); Clear solution

    此方案可获得 ≥ 2.08 mg/mL (4.22 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 4.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 2.08 mg/mL (4.22 mM); Clear solution

    此方案可获得 ≥ 2.08 mg/mL (4.22 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

科研文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号