DS-1040 Tosylate
目录号 : KM2360 CAS No. : 1335138-89-0 纯度 : 98%

DS-1040 Tosylate 是一种具有口服活性的,选择性的凝血酶可激活的纤维蛋白溶解抑制剂 (TAFIa) 的抑制剂,对人和大鼠 TAFIa 的 IC50 分别为 5.92 nM 和 8.01 nM。DS-1040 Tosylate 是纤维蛋白溶解增强剂,可用于血栓栓塞性疾病。

规格 价格 是否有货 数量
5mg
In-stock
10mg
In-stock
50mg
In-stock
100mg
In-stock
200mg 询价 In-stock
500mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

DS-1040 Tosylate is an orally active, selective inhibitor of activated thrombin-activatable fibrinolysis inhibitor (TAFIa) with IC50s of 5.92 nM and 8.01 nM for human and rat TAFIa. DS-1040 Tosylate is a fibrinolysis enhancer for thromboembolic diseases.

体外研究

DS-1040 Tosylate inhibits human carboxypeptidase N (CPN) in vitro with an IC50 of 3.02 mM.

体内研究

DS-1040 Tosylate (0.0005-0.5 mg/kg; IV) significantly reduces the microthrombi index at doses of 0.005 mg/kg and greater.
DS1040 (0.016, 0.031, 0.063, 0.13, 0.25, 0.50 mg/kg; i.v.) increases plasma D-dimer levels in a dose-dependent manner in the microthrombosis model. ED50 and EDmax are 122 and 221 nmol/L, respectively.
DS-1040 (0.25, 0.5, 1, 2, 4, 8, 16 mg/kg; orally) also increases plasma D-dimer levels. EC50 and ECmax values are 114 and 231 nmol/L, respectively.

Animal Model: Male Slc:Wistar rats
Dosage: 0.0005, 0.005, 0.05, 0.5 mg/kg
Administration: IV
Result: Significantly reduced the microthrombi index at doses of 0.005 mg/kg and greater.
分子量
465.61
CAS号
1335138-89-0
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : 100 mg/mL (214.77 mM; Need ultrasonic)

H2O : 100 mg/mL (214.77 mM; Need ultrasonic)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.1477 mL 10.7386 mL 21.4772 mL
5 mM 0.4295 mL 2.1477 mL 4.2954 mL
10 mM 0.2148 mL 1.0739 mL 2.1477 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 5 mg/mL (10.74 mM); Clear solution

    此方案可获得 ≥ 5 mg/mL (10.74 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 50.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 5 mg/mL (10.74 mM); Clear solution

    此方案可获得 ≥ 5 mg/mL (10.74 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 50.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 5 mg/mL (10.74 mM); Clear solution

    此方案可获得 ≥ 5 mg/mL (10.74 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 50.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

暂无相关参考文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2