您当前的位置:
Rhodamine 6G (Synonyms:罗丹明6G; Basic Red 1)
目录号 : KM13836 CAS No. : 989-38-8 纯度 : ≥98%

Rhodamine 6G是罗丹明类似物,可用于Pgp外排测定试验中。它可用于MRP1-介导外排的动力学试验中,以及作为激光染料和具有线粒体探针的潜力。

规格 价格 是否有货 数量
250mg
In-stock
1g
In-stock
5g
In-stock
10g 询价 In-stock
50g 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

Rhodamine 6G is a rhodamine analog useful in Pgp efflux assays. It can be used in characterizing the kinetics of MRP1- mediated efflux, and as a laser dye and potential mitochondrial probe.

体外研究

Rhodamine 6G, also known as Rhodamine 590, is widely used as a lasing medium and as a fluorescence tracer. For use in dye lasers, it is dissolved in methanol, ethanol and a variety of other organic solvents. In environmental flow studies, the tracer medium is typically water. In ethanol, the absorption of rhodamine 6G ranges between 440 nm and 570 nm, with the peak at 530 nm. It is thus ideally suited for pumping by frequency doubled Nd:YAG lasers at 532 nm, copper vapor lasers at 511 nm, and argon-ion lasers at 514 nm. The resulting emission spectrum varies from about 510 nm to around 710 nm with the peak at 550 nm depending on the solvent and the dye concentration. However, the laser emission range is much narrower, from around 560 nm to 610 nm with the peak wavelength around 575 nm. Energy conversion efficiencies greater than 50% are achievable. In order to select the optimal solvent and dye concentration, good knowledge of their effects is a pre-requisite. Rhodamine 6G in DMSO shows a distinct behavior exhibiting only 41% of the fluorescence intensity of the methanol case with an 11 nm red-shifted wavelength. Relatively small changes of the fluorescence spectrum are observed for the different solvents; the highest fluorescence intensity is observed for methanol and lowest for DMSO. The shortest peak wavelength is found in methanol (568 nm) and the longest in DMSO (579 nm). Changing the dye concentration provides tunability between 550 nm in the dilute case and 620 nm at high concentration, at which point the fluorescence spectrum indicates the formation of rhodamine 6G aggregates. Rhodamine 6G is a fluorescent dye capable of penetrating a living cell. Upon entering the cell, Rhodamine 6G binds to the inner membranes of mitochondria. Based on these observations, it has been proposed that Rhodamine dyes may be used for producing fluorescent images of mitochondria with low background noise and high resolution. Extremely low concentrations of Rhodamine 6G appear to selectively destroy malignant cells in culture, sparing the normal cell populations.

体内研究

Melanoma-transplanted mice receiving Rhodamine 6G demonstrate prolonged survival, improved clinical parameters, inhibited tumor growth and metastases count, compared to their untreated counterparts. Twice-a-week 10-6M Rhodamine 6G regimen yield the most prominent results. The Rhodamine-6G enters the circulatory system and labels leukocytes. It is possible to monitor changes in the interactions between leukocytes and the endothelium by determining the numbers of rolling and adhering leukocytes as well as the total flux of these cells.

分子式
C28H31ClN2O3
分子量
479.01
CAS号
989-38-8
中文名称
罗丹明6G
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

4°C, protect from light

*In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)

溶解性数据
In Vitro: 

DMSO : 25 mg/mL (52.19 mM; Need ultrasonic)

H2O : 10 mg/mL (20.88 mM; ultrasonic and warming and heat to 60°C)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.0876 mL 10.4382 mL 20.8764 mL
5 mM 0.4175 mL 2.0876 mL 4.1753 mL
10 mM 0.2088 mL 1.0438 mL 2.0876 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (protect from light)。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: 2.5 mg/mL (5.22 mM); Suspended solution; Need ultrasonic

    此方案可获得 2.5 mg/mL (5.22 mM) 的均匀悬浊液,悬浊液可用于口服和腹腔注射。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: 2.5 mg/mL (5.22 mM); Suspended solution; Need ultrasonic

    此方案可获得 2.5 mg/mL (5.22 mM) 的均匀悬浊液,悬浊液可用于口服和腹腔注射。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

临床试验
暂无相关参考文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
动物实验计算换算器
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL ddH2O,混匀澄清。

配置后的溶液总体积

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。