Clobetasone butyrate
目录号 : KM13268 CAS No. : 25122-57-0 纯度 : 98%

Clobetasone butyrate 是一种糖皮质类固醇 (glucocorticoid),具有局部抗炎活性,尤其是在皮肤上。Clobetasone butyrate 可用于缓解皮质类固醇反应性症状,包括特应性皮炎和牛皮癣。

规格 价格 是否有货 数量
100mg
In-stock
200mg 询价 In-stock
500mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

Clobetasone butyrate is a synthetic glucocorticoid and has topical anti-inflammatory activity especially in skin. Clobetasone butyrate can be used to relieve corticosteroid-responsive dermatoses, including atopic dermatitis and psoriasis.

体内研究

Clobetasone butyrate (application on the skin; 0.05%; 7 weeks) induces epidermal thinning in skin, Clobetasone butyrate 7 weeks causes much less epidermal thinning in the pig than flurandrenolone (0.05%) or fluocinolone acetonide (0.025%), both of which causes severe atrophy.

Animal Model: Large white domestic pig
Dosage: 0.5% application on the skin
Administration: 7 weeks
Result: Caused moderate to slight atrophy.
分子式
C26H32ClFO5
分子量
478.98
CAS号
25122-57-0
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : ≥ 250 mg/mL (521.94 mM)

* "≥" means soluble, but saturation unknown.

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.0878 mL 10.4388 mL 20.8777 mL
5 mM 0.4176 mL 2.0878 mL 4.1755 mL
10 mM 0.2088 mL 1.0439 mL 2.0878 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 6.25 mg/mL (13.05 mM); Clear solution

    此方案可获得 ≥ 6.25 mg/mL (13.05 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 62.5 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

临床试验
科研文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号