Fiboflapon sodium (Synonyms:GSK2190915 sodium salt; AM-803 sodium)
目录号 : KM11228 CAS No. : 1196070-26-4 纯度 : 98%

Fiboflapon sodium (GSK2190915; AM-803) 是一种口服有效的 5-脂氧合酶激活蛋白 (FLAP) 抑制剂,结合 FLAP 的效价为 2.9 nM,在人血中抑制 LTB4 的 IC50 为 76 nM。

规格 价格 是否有货 数量
2mg
In-stock
5mg
In-stock
10mg
In-stock
50mg
In-stock
100mg 询价 In-stock
200mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

Fiboflapon sodium (GSK2190915; AM-803) is a potent and orally bioavailable 5-lipoxygenase-activating protein (FLAP) inhibitor with a potency of 2.9 nM in FLAP binding, an IC50 of 76 nM for inhibition of LTB4 in human blood.

IC50&Target

LTB4

76 nM (IC50)

体外研究

Fiboflapon (AM803) exhibits excellent preclinical toxicology and pharmacokinetics in rat and dog. Fiboflapon (AM803) also demonstrated an extended pharmacodynamic effect in a rodent bronchoalveolar lavage (BAL) model. Oral administration of Fiboflapon (AM803) (1 mg/kg) resulted in sustained inhibition of ex vivo ionophore-challenged whole blood LTB4 biosynthesis with >90% inhibition for up to 12 h and an EC50 of approximately 7 nM. When rat lungs were challenged in vivo with calcium-ionophore, Fiboflapon (AM803) inhibited LTB4 and cysteinyl leukotriene (CysLT) production with ED50s of 0.12 mg/kg and 0.37 mg/kg, respectively. The inhibition measured 16 h following a single oral dose of 3 mg/kg was 86% and 41% for LTB4 and CysLTs, respectively. In an acute inflammation setting, Fiboflapon (AM803) dose-dependently reduced LTB4, CysLTs, plasma protein extravasation and neutrophil influx induced by peritoneal zymosan injection. Finally, AM803 increased survival time in mice exposed to a lethal intravenous injection of platelet activating factor (PAF).

分子式
C38H42N3O4S-.Na+
分子量
659.81
CAS号
1196070-26-4
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : ≥ 32 mg/mL (48.50 mM)

* "≥" means soluble, but saturation unknown.

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 1.5156 mL 7.5779 mL 15.1559 mL
5 mM 0.3031 mL 1.5156 mL 3.0312 mL
10 mM 0.1516 mL 0.7578 mL 1.5156 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

临床试验
暂无相关参考文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
动物实验计算换算器
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度 mg/ml;

DMSO母液配制方法 mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL ddH2O,混匀澄清。

配置后的溶液总体积

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。