Dynasore
目录号 : KM11056 CAS No. : 304448-55-3 纯度 : 98%

Dynasore是可渗透细胞的发动蛋白抑制剂,IC50为15 μM。

规格 价格 是否有货 数量
10mg
In-stock
50mg
In-stock
100mg 询价 In-stock
200mg 询价 In-stock
KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

Dynasore is a cell-permeable dynamin inhibitor with an IC50 of 15 μM.

体外研究

Dynasore interferes with the GTPase activity of dynamin1, dynamin2, and Drp1, the mitochondrial dynamin, but not of other small GTPases. Dynasore acts as a potent inhibitor of endocytic pathways known to depend on dynamin by rapidly blocking coated vesicle formation within seconds of dynasore addition. Two types of coated pit intermediates accumulate during dynasore treatment, g-shaped, half formed pits and O-shaped, fully formed pits, captured while pinching off. Dynasore inhibits HSV-1 and HSV-2 infection of human epithelial and neuronal cells, including primary genital tract cells and human fetal neurons and astrocytes. Dynasore reduces the number of viral capsids reaching the nuclear pore if added at the time of viral entry and that, when added as late as 8 h postentry, dynasore blocks the transport of newly synthesized viral proteins from the nucleus to the cytosol. Dynasore prevents ischemia/reperfusion induced elevation of left ventricular end diastolic pressure. Dynasore also decreases cardiac troponin I efflux during reperfusion and reduces infarct size. In cultured adult mouse cardiomyocytes subjected to oxidative stress, dynasore increases cardiomyocyte survival and viability.

体内研究

Dynasore ameliorates the motor dysfunction greatly at 3, 7, and 10 days after SCI in rats. Dynasore significantly enhances motor function which may be by inhibiting the activation of neuronal mitochondrial apoptotic pathway and astrocytic proliferation in rats after SCI.

分子式
C18H14N2O4
分子量
322.31
CAS号
304448-55-3
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : ≥ 50 mg/mL (155.13 mM)

* "≥" means soluble, but saturation unknown.

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 3.1026 mL 15.5130 mL 31.0260 mL
5 mM 0.6205 mL 3.1026 mL 6.2052 mL
10 mM 0.3103 mL 1.5513 mL 3.1026 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.5 mg/mL (7.76 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (7.76 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.5 mg/mL (7.76 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (7.76 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

科研文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号