Menin-MLL inhibitor MI-2
目录号 : KM5652 CAS No. : 1271738-62-5 纯度 : 98%

Menin-MLL inhibitor MI-2 抑制 Menin-MLL 相互作用,IC50 为 446±28 nM。

规格 价格 是否有货 数量
2mg
In-stock
5mg
In-stock
10mg
In-stock
50mg
In-stock
100mg
In-stock
200mg
In-stock
500mg 询价 In-stock
1g 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

Menin-MLL inhibitor MI-2 is a Menin-MLL interaction inhibitor with IC50 of 446±28 nM.

体外研究

Menin-MLL inhibitor MI-2 very effectively blocks proliferation of MLL-AF9 and MLL-ENL transduced BMC, with GI50 values of about 5 μM. Assessment of diverse hydrophobic groups at R1 led to the development of several compounds with IC50 values in the nanomolar range, including MI-2 (IC50= 446±28 nM) and MI-3 (IC50=648±25 nM).The dissociation constants measured for the menin-MLL inhibitors are at the nanomolar level, Kd=158 nM for MI-2. MI-2 can access the protein target and very effectively inhibit the menin-MLL-AF9 interaction in human cells. Furthermore, MI-2 shows only a small effect on the cell growth of E2A-HLF transduced BMC (GI50>50 μM), which may be due to inhibition of the menin interaction with wild-type MLL. Treatment with MI-2 results in GI50 values below 10 μM in MV4;11 (harboring MLL-AF4; GI50=9.5 μM), KOPN-8 (MLL-ENL; GI50=7.2 μM) and ML-2 (MLL-AF6; GI50=8.7 μM), and in MonoMac6 (MLL-AF9; GI50=18 μM).

分子式
C18H25N5S2
分子量
375.55
CAS号
1271738-62-5
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : 50 mg/mL (133.14 mM; Need ultrasonic)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.6628 mL 13.3138 mL 26.6276 mL
5 mM 0.5326 mL 2.6628 mL 5.3255 mL
10 mM 0.2663 mL 1.3314 mL 2.6628 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.5 mg/mL (6.66 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (6.66 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.5 mg/mL (6.66 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (6.66 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 2.5 mg/mL (6.66 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (6.66 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

科研文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号