Droxinostat (Synonyms:NS 41080)
目录号 : KM8387 CAS No. : 99873-43-5 纯度 : 98%

Droxinostat(NS41080)是HDAC3,HDAC6和HDAC8抑制剂,IC50分别为16.9,2.47和1.46 μM。

规格 价格 是否有货 数量
5mg
In-stock
10mg
In-stock
50mg
In-stock
100mg
In-stock
200mg 询价 In-stock
500mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

Droxinostat(NS41080) is a selective inhibitor of HDAC3, HDAC6, and HDAC8 with IC50 of 16.9, 2.47 and 1.46 μM, respectively; > 8-fold selective against HDAC3 and no inhibition to HDAC1, 2, 4, 5, 7, 9, and 10. IC50 Value: 16.9 μM(HDAC3); 2.47 μM(HDAC6); 1.46 μM(HDAC8) Target: HDAC3/6/8 in vitro: Droxinostat is originally identified as a sensitizer of PPC-1 cells to FAS and TRAIL by downregulating the expression of c-Fas-associated death domain-like interleukin-1-converting enzyme-like inhibitory protein (c-FLIP). the direct targets of Droxinostat remains enigma until recently. It is revealed that in histone deacetylases (HDAC) isoform 1-10, Droxinostat selective inhibits HDAC3, 6, and 8, with IC50 values of 16.9 μM, 2.47 μM, and 1.46 μM, respectively, without inhibiting other HDAC members (IC50 > 20 μM). In MCF-7 breast cancer cells, Droxinostat (10 μM–100 μM) sensitizes cells to apoptosis by decreasing c-FLIPL and c-FLIPS expression, reducing cell survival, and inducing apoptosis. in vivo: In SCID mice models, Droxinostat (30 μM)-treated PPC-1 cells results in decreased distant tumor formation than untreated cells.

分子式
C11H14ClNO3
分子量
243.69
CAS号
99873-43-5
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : ≥ 150 mg/mL (615.54 mM)

* "≥" means soluble, but saturation unknown.

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 4.1036 mL 20.5179 mL 41.0357 mL
5 mM 0.8207 mL 4.1036 mL 8.2071 mL
10 mM 0.4104 mL 2.0518 mL 4.1036 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.5 mg/mL (10.26 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (10.26 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.5 mg/mL (10.26 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (10.26 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 2.5 mg/mL (10.26 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (10.26 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

科研文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号