T16Ainh-A01
目录号 : KM4816 CAS No. : 552309-42-9 纯度 : 98%

T16Ainh-A01 是一类氨基苯基噻唑,是有效的跨膜蛋白 16A 的抑制剂,抑制TMEM16A介导的氯离子电流,IC50 约为1 µM。TMEM16A (ANO1)起钙激活氯离子通道(CaCC)的作用。

规格 价格 是否有货 数量
5mg
In-stock
10mg
In-stock
50mg
In-stock
100mg 询价 In-stock
200mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

T16Ainh-A01, an aminophenylthiazole, is a potent transmembrane protein 16A (TMEM16A) inhibitor, inhibiting TMEM16A-mediated chloride currents with an IC50 value of ~1 µM. TMEM16A (ANO1) functions as a calcium-activated chloride channel (CaCC).

体外研究

T16Ainh-A01 (0.3-30 μM) significantly reduces both inward and outward components of IClCa, and inhibits IClCa in RUICC without significantly affecting L-type Ca current.
T16Ainh-A01 (10 μM) inhibits nearly completely TMEM16A chloride current (induced by 275 nM free calcium in the pipette) at all voltages, indicating a voltage-independent block mechanism.

分子式
C19H20N4O3S2
分子量
416.52
CAS号
552309-42-9
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMF : ≥ 10 mg/mL (24.01 mM)

DMSO : ≥ 5 mg/mL (12.00 mM)

* "≥" means soluble, but saturation unknown.

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.4008 mL 12.0042 mL 24.0085 mL
5 mM 0.4802 mL 2.4008 mL 4.8017 mL
10 mM 0.2401 mL 1.2004 mL 2.4008 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 2.08 mg/mL (4.99 mM); Clear solution

    此方案可获得 ≥ 2.08 mg/mL (4.99 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

科研文献
暂无相关参考文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2