Tandutinib hydrochloride
目录号 : KM2400 纯度 : 98%

Tandutinib hydrochloride (MLN518 hydrochloride) 是一种有效和选择性的 FLT3 的抑制剂,其 IC50 为 0.22 μM,并且还抑制 c-Kit 和 PDGFR,其 IC50 分别为 0.17 μM 和 0.20 μM。Tandutinib hydrochloride 可用于急性骨髓性白血病,并具有穿越血脑屏障的能力。

规格 价格 是否有货 数量
50mg
In-stock
100mg
In-stock
200mg 询价 In-stock
500mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

Tandutinib hydrochloride (MLN518 hydrochloride) is a potent and selective inhibitor of the FLT3 with an IC50 of 0.22 μM, and also inhibits c-Kit and PDGFR with IC50s of 0.17 μM and 0.20 μM, respectively. Tandutinib hydrochloride can be used for acute myelogenous leukemia (AML). Tandutinib hydrochloride has the ability to cross the blood-brain barrier.

体外研究

Tandutinib (0-3 μM; 30 minutes; Ba/F3 cells) treatment inhibits IL-3-independent cell growth and FLT3-ITD autophosphorylation with an IC50 of 10-100 nM in Ba/F3 cells expressing different FLT3-ITD mutants.
Tandutinib (1 μM; 24-96 hours; Molm-14 and THP-1 AML cells) treatment induces apoptosis in FLT3-ITD-positive AML cells.
In human FLT3-ITD-positive AML cell lines, Tandutinib inhibits FLT3-ITD phosphorylation (IC50 of ~30 nM). As with Erk2, a constitutively high level of Akt phosphorylation is readily detected and is efficiently blocked by pretreatment of the Molm-14 cells with 100-300 nM Tandutinib.
Tandutinib inhibits cell proliferation of the FLT3-ITD-positive Molm-13 and Molm-14 with an IC50 of 10 nM. And signaling through the MAP kinase and PI3 kinase pathways.

Apoptosis Analysis

Cell Line: Molm-14 and THP-1 AML cells
Concentration: 1 μM
Incubation Time: 24 hours, 48 hours, 72 hours, 96 hours
Result: Induced apoptosis in FLT3-ITD-positive AML cells.

Western Blot Analysis

Cell Line: Ba/F3 cells
Concentration: 0 μM, 0.003 μM, 0.01 μM, 0.03 μM, 0.1 μM, 1 μM and 3 μM
Incubation Time: 30 minutes
Result: In Ba/F3 cells expressing different FLT3-ITD mutants, inhibited IL-3-independent cell growth and FLT3-ITD autophosphorylation.
体内研究

Tandutinib (60 mg/kg; oral gavage; daily; for 35 days; athymic nude mice) treatment causes a statistically significant increase in survival that was extended on average by 20 days.

Animal Model: Athymic nude mice injected with Ba/F3 cells
Dosage: 60 mg/kg
Administration: Oral gavage; daily; for 35 days
Result: Caused a statistically significant increase in survival that was extended on average by 20 days.
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : ≥ 100 mg/mL (166.90 mM)

H2O : 100 mg/mL (166.90 mM; Need ultrasonic)

* "≥" means soluble, but saturation unknown.

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 1.6690 mL 8.3450 mL 16.6900 mL
5 mM 0.3338 mL 1.6690 mL 3.3380 mL
10 mM 0.1669 mL 0.8345 mL 1.6690 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: PBS

    Solubility: 100 mg/mL (166.90 mM); Clear solution; Need ultrasonic

  • 2.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.5 mg/mL (4.17 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (4.17 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.5 mg/mL (4.17 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (4.17 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

临床试验
科研文献
暂无相关参考文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2