Tandutinib (Synonyms:坦度替尼; MLN518; CT53518)
目录号 : KM2393 CAS No. : 387867-13-2 纯度 : 98%

Tandutinib (MLN518) 是一种有效和选择性的 FLT3 的抑制剂,其 IC50 为 0.22 μM,并且还抑制 c-Kit 和 PDGFR,其 IC50 分别为 0.17 μM 和 0.20 μM。Tandutinib 可用于急性骨髓性白血病,并具有穿越血脑屏障的能力。

规格 价格 是否有货 数量
50mg
In-stock
100mg
In-stock
200mg 询价 In-stock
500mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

Tandutinib (MLN518) is a potent and selective inhibitor of the FLT3 with an IC50 of 0.22 μM, and also inhibits c-Kit and PDGFR with IC50s of 0.17 μM and 0.20 μM, respectively. Tandutinib can be used for acute myelogenous leukemia (AML). Tandutinib has the ability to cross the blood-brain barrier.

体外研究

Tandutinib (0-3 μM; 30 minutes; Ba/F3 cells) treatment inhibits IL-3-independent cell growth and FLT3-ITD autophosphorylation with an IC50 of 10-100 nM in Ba/F3 cells expressing different FLT3-ITD mutants.
Tandutinib (1 μM; 24-96 hours; Molm-14 and THP-1 AML cells) treatment induces apoptosis in FLT3-ITD-positive AML cells.
In human FLT3-ITD-positive AML cell lines, Tandutinib inhibits FLT3-ITD phosphorylation (IC50 of ~30 nM). As with Erk2, a constitutively high level of Akt phosphorylation is readily detected and is efficiently blocked by pretreatment of the Molm-14 cells with 100-300 nM Tandutinib.
Tandutinib inhibits cell proliferation of the FLT3-ITD-positive Molm-13 and Molm-14 with an IC50 of 10 nM. And signaling through the MAP kinase and PI3 kinase pathways.

Apoptosis Analysis

Cell Line: Molm-14 and THP-1 AML cells
Concentration: 1 μM
Incubation Time: 24 hours, 48 hours, 72 hours, 96 hours
Result: Induced apoptosis in FLT3-ITD-positive AML cells.

Western Blot Analysis

Cell Line: Ba/F3 cells
Concentration: 0 μM, 0.003 μM, 0.01 μM, 0.03 μM, 0.1 μM, 1 μM and 3 μM
Incubation Time: 30 minutes
Result: In Ba/F3 cells expressing different FLT3-ITD mutants, inhibited IL-3-independent cell growth and FLT3-ITD autophosphorylation.
体内研究

Tandutinib (60 mg/kg; oral gavage; daily; for 35 days; athymic nude mice) treatment causes a statistically significant increase in survival that was extended on average by 20 days.

Animal Model: Athymic nude mice injected with Ba/F3 cells
Dosage: 60 mg/kg
Administration: Oral gavage; daily; for 35 days
Result: Caused a statistically significant increase in survival that was extended on average by 20 days.
分子式
C31H42N6O4
分子量
562.70
CAS号
387867-13-2
中文名称
坦度替尼
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : 50 mg/mL (88.86 mM; Need ultrasonic)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 1.7771 mL 8.8857 mL 17.7715 mL
5 mM 0.3554 mL 1.7771 mL 3.5543 mL
10 mM 0.1777 mL 0.8886 mL 1.7771 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.5 mg/mL (4.44 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (4.44 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.5 mg/mL (4.44 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (4.44 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 2.5 mg/mL (4.44 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (4.44 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

临床试验
科研文献
暂无相关参考文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2