S1RA hydrochloride (Synonyms:E-52862 hydrochloride)
目录号 : KM14498 CAS No. : 1265917-14-3 纯度 : 98%

S1RA hydrochloride (E-52862 hydrochloride) 是高活性和选择性的sigma-1受体(σ1R)拮抗剂,Ki为17nM,而对σ2R的Ki则高于1000nM。

规格 价格 是否有货 数量
5mg
In-stock
10mg
In-stock
25mg
In-stock
50mg
In-stock
100mg
In-stock
250mg
In-stock
500mg 询价 In-stock
1g 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

S1RA hydrochloride (E-52862 hydrochloride) is a potent and selective sigma-1 receptor(σ1R, Ki=17 nM) antagonist, showed good selectivity against σ2R (Ki > 1000 nM). IC50 value: 17 nM (Ki) [1] Target: σ1R antagonist in vitro: S1RA behaved as a highly selective σ1 receptor antagonist. It showed high affinity for human (Ki= 17 nM) and guinea pig (Ki= 23.5 nM) σ1 receptors but no significant affinity for the σ2 receptors (Ki > 1000 nM for guinea pig and rat σ2 receptors). Moderate affinity (Ki= 328 nM) and antagonistic activity, with very low potency (IC50= 4700 nM) was found at the human 5-HT2B receptor. S1RA showed no significant affinity (Ki > 1 μM or % inhibition at 1 μM < 50%) for other additional 170 targets (receptors, transporters, ion channels and enzymes) [2]. in vivo: Control (non-operated) and nerve-injured mice received a single or repeated (twice daily for 12 days) i.p. administration of S1RA at 25 mg·kg 1, the same dose used for the assessment of behavioural hypersensitivity in the chronic treatment study. Acute treatment was given on day 12 post-surgery and repeated treatment with S1RA started the day of surgery, as in the behavioural studies [2]. Intrathecal pre-treatment with idazoxan prevented the systemic S1RA antinociceptive effect, suggesting that the S1RA antinociception depends on the activation of spinal α2 -adrenoceptors which, in turn, could induce an inhibition of formalin-evoked glutamate release. When administered locally, intrathecal S1RA inhibited only the flinching behavior, whereas intracerebroventricularly or intraplantarly injected also attenuated the lifting/licking behavior [3].

分子式
C20H24ClN3O2
分子量
373.88
CAS号
1265917-14-3
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : 100 mg/mL (267.47 mM; Need ultrasonic)

H2O : 16.67 mg/mL (44.59 mM; Need ultrasonic)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.6747 mL 13.3733 mL 26.7465 mL
5 mM 0.5349 mL 2.6747 mL 5.3493 mL
10 mM 0.2675 mL 1.3373 mL 2.6747 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: PBS

    Solubility: 110 mg/mL (294.21 mM); Clear solution; Need ultrasonic

  • 2.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.5 mg/mL (6.69 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (6.69 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.5 mg/mL (6.69 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (6.69 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 4.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 2.5 mg/mL (6.69 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (6.69 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号