CU-CPT-8m (Synonyms:TLR8-specific antagonist)
目录号 : KM9612 CAS No. : 125079-83-6 纯度 : 98%

CU-CPT-8m 是 TLR8 的特异性拮抗剂,其 IC50 值为 67 nM。

规格 价格 是否有货 数量
5mg
In-stock
10mg
In-stock
50mg
In-stock
100mg
In-stock
200mg 询价 In-stock
500mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

CU-CPT-8m is a specific TLR8 antagonist, with an IC50 of 67 nM.

体外研究

CU-CPT-8m is a specific TLR8 antagonist, with an IC50 of 67±10 nM and negligible cytotoxicity. The Kd value of CU-CPT-8m is determined to be 220 nM. CU-CPT-8m only reduces the proinflammatory response in the TLR8-overexpressing cells strongly supports that CU-CPT-8m directly recognizes TLR8 in cells. It is particularly notable that TLR7 signaling is not affected at concentrations up to 75 μM. TLR7 and TLR8 are closely related and share many common ligands. Treatment of 1 μM CU-CPT-8m completely abolishes the elevation of TNF-α and IL-8 mRNA levels induced by R848. CU-CPT-8m inhibits R848-induced TNF-α production in the differentiated THP-1 monocytes cells in a dose-dependent manner with an IC50 of 90±10 nM, which is in good agreement with its IC50 value determined in HEK-Blue TLR8 cells.

分子式
C14H12N4O
分子量
252.27
CAS号
125079-83-6
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : 30 mg/mL (118.92 mM; Need ultrasonic)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 3.9640 mL 19.8200 mL 39.6401 mL
5 mM 0.7928 mL 3.9640 mL 7.9280 mL
10 mM 0.3964 mL 1.9820 mL 3.9640 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: 2.5 mg/mL (9.91 mM); Suspended solution; Need ultrasonic and warming

    此方案可获得 2.5 mg/mL (9.91 mM) 的均匀悬浊液,悬浊液可用于口服和腹腔注射。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: 1.25 mg/mL (4.96 mM); Clear solution; Need ultrasonic and warming

    此方案可获得 1.25 mg/mL (4.96 mM) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 12.5 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 1.25 mg/mL (4.96 mM); Clear solution

    此方案可获得 ≥ 1.25 mg/mL (4.96 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 12.5 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

科研文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号