Benzo[a]pyrene - CAS:50-32-8

您当前的位置：

Benzo[a]pyrene (Synonyms:苯并[a]芘; 3,4-Benzopyrene)

目录号 : KM9493 CAS No. : 50-32-8 纯度 : 98%

Data Sheet 产品使用指南

Benzo[a]pyrene 在动物模型中显示肺致癌性，并且它们经常用于化学预防研究。

规格	价格	是否有货
10mg		In-stock
50mg	询价	In-stock
100mg	询价	In-stock

加入购物车大包装询价

Other Forms of Rapamycin:

Ginkgolide B In-stock
Isoginkgetin In-stock
Ginkgolic acid C17:1 In-stock
Ginkgolic Acid In-stock
Propargyl-PEG4-amine In-stock

KKL Med 的所有产品和服务仅用于科学研究，不能被用于人体，兽医，我们也不向个人提供产品和服务。

生物活性

Benzo[a]pyrene shows lung carcinogenicity in animal models, and it is frequently used in chemoprevention studies.

体内研究

Statistically significant decrease is observed at 7 weeks in females receiving 1.0 mg Benzo[a]pyrene (B[a]P) compare with the vehicle group. As lung tumorigenesis induced by Benzo[a]pyrene is dose dependent in female A/J mice. The incidence of hyperplasia values in females treating with 0.25, 0.50, and 1.0 mg Benzo[a]pyrene are significantly higher than in the vehicle-treated group. The incidence of adenoma in females receiving 1.0 mg Benzo[a]pyrene is significantly higher than in the vehicle group. The multiplicity of hyperplasia in females receiving 0.50 or 1.0 mg Benzo[a]pyrene is significantly higher than in the vehicle group. The multiplicity of adenoma in the group treated with 1.0 mg is also significantly higher than in the vehicle group. The incidences of hyperplasia and adenoma in female A/J mice are significantly increased by Benzo[a]pyrene in a dose-dependent manner. Benzo[a]pyrene induces an average of 9.38±1.75 tumors with an average tumor load of 19.53±3.81 mm (P<0.05 compare to control). Benzo[a]pyrene administration significantly (P<0.05) decreases cAMP levels in tumors with adjacent lung tissues. The expression level of PDE4D gene is also increased by Benzo[a]pyrene administration.

分子式

C₂₀H₁₂

分子量

252.31

CAS号

50-32-8

中文名称

苯并[a]芘

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

Powder	-20°C	3 years
	4°C	2 years
In solvent	-80°C	6 months
	-20°C	1 month

溶解性数据

In Vitro:

DMSO : 50 mg/mL (198.17 mM; Need ultrasonic and warming)

配制储备液

浓度溶剂体积质量	1 mg	5 mg	10 mg

1 mM	3.9634 mL	19.8169 mL	39.6338 mL
5 mM	0.7927 mL	3.9634 mL	7.9268 mL
10 mM	0.3963 mL	1.9817 mL	3.9634 mL

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80°C, 6 months; -20°C, 1 month。-80°C 储存时，请在 6 个月内使用，-20°C 储存时，请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用；以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

1.

请依序添加每种溶剂： 10% DMSO 40% PEG300 5% Tween-80 45% saline
Solubility: ≥ 1.67 mg/mL (6.62 mM); Clear solution

此方案可获得 ≥ 1.67 mg/mL (6.62 mM，饱和度未知) 的澄清溶液。
以 1 mL 工作液为例，取 100 μL 16.7 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。
2.

请依序添加每种溶剂： 10% DMSO 90% (20% SBE-β-CD in saline)
Solubility: 1.67 mg/mL (6.62 mM); Suspended solution; Need ultrasonic

此方案可获得 1.67 mg/mL (6.62 mM) 的均匀悬浊液，悬浊液可用于口服和腹腔注射。
以 1 mL 工作液为例，取 100 μL 16.7 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。
3.

请依序添加每种溶剂： 10% DMSO 90% corn oil
Solubility: ≥ 1.67 mg/mL (6.62 mM); Clear solution

此方案可获得 ≥ 1.67 mg/mL (6.62 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。
以 1 mL 工作液为例，取 100 μL 16.7 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。