Plerixafor (Synonyms:普乐沙福; AMD 3100; JM3100; SID791)
目录号 : KM3756 CAS No. : 110078-46-1 纯度 : ≥98%

Plerixafor (AMD 3100) 是选择性的 CXCR4 拮抗剂,IC50 为 44 nM。Plerixafor 是一种免疫刺激剂和造血干细胞动员剂,也是 CXCR7 的变构激动剂。Plerixafor 抑制 HIV-1 和 HIV-2 的复制,EC50 为 1-10 nM。

规格 价格 是否有货 数量
10mg
In-stock
50mg
In-stock
100mg
In-stock
200mg 询价 In-stock
500mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

Plerixafor (AMD 3100) is a selective CXCR4 antagonist with an IC50 of 44 nM. Plerixafor, an immunostimulant and a hematopoietic stem cell (HSC) mobilizer, is an allosteric agonist of CXCR7. Plerixafor inhibits HIV-1 and HIV-2 replication with an EC50 of 1-10 nM.

体外研究

The CXCR4 inhibitor Plerixafor (AMD3100) is a potent inhibitor of CXCL12-mediated chemotaxis (IC50, 5.7 nM) with a potency slightly better than its affinity for CXCR4. Plerixafor interferes with the interaction of CXCR4 with its natural ligand, SDF-1 (CXCL12). Treating the cells with CCX771 or CXCL11 has no effect on CXCL12-mediated MOLT-4 or U937 TEM. In contrast, 10 μM Plerixafor inhibits CXCL12-mediated TEM in both cells lines
. Plerixafor prevents the infiltration of tumor-associated macrophages (TAMs) into the tumor tissues.

体内研究

Plerixafor (2 mg/kg) administration to UUO mice exacerbates renal interstitial T cell infiltration, resulting in increased production of the pro-inflammatory cytokines IL-6 and IFN-γ and decreased expression of the anti-inflammatory cytokine IL-10.
Both perivascular and interstitial fibrosis are significantly reduced by the CXCR4 antagonist, Plerixafor (AMD3100) at 8 weeks. LD50, mouse, SC: 16.3 mg/kg; LD50, rat, SC: >50 mg/kg; LD50, mouse and rat, IV injection: 5.2 mg/kg.

分子式
C28H54N8
分子量
502.78
CAS号
110078-46-1
中文名称
普乐沙福
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

Ethanol : 50 mg/mL (99.45 mM; Need ultrasonic)

DMSO : 1.92 mg/mL (3.82 mM; ultrasonic and warming and adjust pH to 7 with 1 M HCL and heat to 60°C)

H2O : < 0.1 mg/mL (ultrasonic) (insoluble)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 1.9889 mL 9.9447 mL 19.8894 mL
5 mM 0.3978 mL 1.9889 mL 3.9779 mL
10 mM 0.1989 mL 0.9945 mL 1.9889 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% EtOH → 40% PEG300 → 5% Tween-80 → 45% saline

    Solubility: ≥ 3 mg/mL (5.97 mM); Clear solution

    此方案可获得 ≥ 3 mg/mL (5.97 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 30.0 mg/mL 的澄清 EtOH 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

     
  • 2.

    请依序添加每种溶剂: 10% EtOH → 90% (20% SBE-β-CD in saline)

    Solubility: ≥ 3 mg/mL (5.97 mM); Clear solution

    此方案可获得 ≥ 3 mg/mL (5.97 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 30.0 mg/mL 的澄清 EtOH 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

     
  • 3.

    请依序添加每种溶剂: 10% EtOH → 90% corn oil

    Solubility: ≥ 3 mg/mL (5.97 mM); Clear solution

    此方案可获得 ≥ 3 mg/mL (5.97 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 30.0 mg/mL 的澄清 EtOH 储备液加到 900 μL玉米油中,混合均匀。

临床试验
科研文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号