K02288
目录号 : KM10267 CAS No. : 1431985-92-0 纯度 : 98%

K02288是一种有效的骨形态发生蛋白 (BMP) I 型受体抑制剂,抑制 ALK1,ALK2,ALK6 的 IC50 为1.8,1.1,6.4 nM。对 ALK3 和 ALK6 的抑制稍弱,IC50在 5-34 nM 之间。

规格 价格 是否有货 数量
10mg
In-stock
50mg
In-stock
100mg 询价 In-stock
200mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

K02288 is a potent bone morphogenetic protein (BMP) type I receptor inhibitor with IC50s of 1.8, 1.1, 6.4 nM for ALK1, ALK2 and ALK6, respectively. K02288 shows slightly weaker inhibition against ALK3 and ALK6 with IC50s of of 5-34 nM.

体外研究

K02288 reduces a robust phosphorylation of Smad1/5/8 induced by BMP4 stimulation, with an apparent IC50 of 100 nM. K02288 causes near complete inhibition of Smad2 phosphorylation at 0.5 µM. K02288 binds to ALK1 in an ATP-mimetic fashion with two hydrogen bonds to the kinase hinge. K02288 also inhibits BMP9-ALK1 signalling, and induces a hypersprouting phenotype in HUVECs.

体内研究

K02288 (1 µM) induces dysfunctional angiogenesis in a chick embryo CAM model.

分子式
C20H20N2O4
分子量
352.38
CAS号
1431985-92-0
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
In Vitro: 

DMSO : ≥ 58.6 mg/mL (166.30 mM)

* "≥" means soluble, but saturation unknown.

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.8378 mL 14.1892 mL 28.3785 mL
5 mM 0.5676 mL 2.8378 mL 5.6757 mL
10 mM 0.2838 mL 1.4189 mL 2.8378 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.5 mg/mL (7.09 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (7.09 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.5 mg/mL (7.09 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (7.09 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 2.5 mg/mL (7.09 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (7.09 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

科研文献
The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号